Administrator's Guide

Chapter 3. Configuring 3Com VCX IP
Telecommuting Module
You connect to your 3Com VCX IP Telecommuting Module by entering its name or IP
address in the Location box of your web browser.
Logging on
Before you can configure the Telecommuting Module, you must enter your administrator
username and password or RADIUS username and password. The admin user is predefined
with complete administration privileges.
Log on again
If you have a web connection for Telecommuting Module configuration that is inactive for
more than 10 minutes, you must enter the password again and click on one of the buttons
Keep changes below and Abandon changes below.
On all pages where changes have been made, the two buttons Keep changes below and
Abandon changes below will be shown when you log on again. Keep changes below con-
nects you to the Telecommuting Module and stores the preliminary configuration you have
changed. Abandon changes below connects you to the Telecommuting Module and dis-
cards the changes you have made on this page.
On pages where nothing has been changed, the Log in again button is displayed. Enter the
password and click on the button to re-connect to the Telecommuting Module.
The Telecommuting Module’s encryption key is changed every 24 hours. If you have a web
connection for Telecommuting Module configuration when this happens, you must enter the
password again. This works in the same way as when your connection has been inactive for
more than 10 minutes (see above).
17