Administrator's Guide

Chapter 15. Command Line Reference
confirm-testrun
Usage: confirm-testrun
With this command, you confirm the ongoing test run, making the preliminary configuration
permanent.
continue-testrun
Usage: continue-testrun
With this command, you enter an unlimited test mode. This can only be done when a test
run is in progress. When in the unlimited test mode, you can make the preliminary con-
figuration permanent using the confirm-testrun command, or abort the test run using the
abort-testrun command.
start-testrun
Usage: start-testrun [timelimit]
With this command, you enter a limited test run of the Telecommuting Module’s preliminary
configuration. The test run will be automatically aborted when the time limit has expired,
unless you enter the unlimited test mode using the continue-testrun command, or make the
configuration permanent using the confirm-testrun command.
The test run can also be manually aborted using the abort-testrun command.
The time limit is specified in seconds. If no time limit is entered, the limit set in the we-
bgui.testmode table is used.
Table Definitions
Here, the tables used in the Command Line Interface (CLI) are defined. For each table, the
fields in the table are defined. Types and selections are defined in subsequent sections.
cert.cas
Corresponding setting in web GUI: CA Certificates on page Certificates
Table type: Dynamic
A list of CA certificates for use in the Ingate.
Field Name Field Type Explanation
cert OptCertificate The CA certificate.
crl OptCertCrl A certificate revocation list.
name Name The reference name for this certificate.
cert.own_certs
Corresponding setting in web GUI: Private Certificates on page Certificates
Table type: Dynamic
A list of own X.509 certificates.
240