Administrator's Guide

Chapter 11. SIP Traffic
Request-URI
Select a matching Request-URI pattern, created in the Matching Request-URI table;
Action
Select actions for this request. The Telecommuting Module can do the following:
Forward: The request is sent to the destination selected under Forward To.
Auth: The Telecommuting Module asks the requestor for authentication.
ENUM: The Telecommuting Module performs an ENUM lookup to get the new destination.
Allow: The Forward To column is ignored and the request is processed according to the
Telecommuting Module settings outside the Dial Plan table.
Reject: The request is rejected. The Telecommuting Module sends a 403 (Forbidden) re-
sponse.
A lot of combinations of the above actions are available in the drop-down menu.
When neither the Advanced SIP Routing or the SIP Trunking module has been installed, this
column only offers a limited number of options.
Forward To
Select a Forward To pattern, created in the Forward To table;
Add Prefix
Sometimes, you might want to add something to a Request-URI when sending the request
on to certain servers. Under Forward, you can enter a prefix which will be added to the
Request-URI when the Forward action is performed. Under ENUM, you can enter a prefix
which will be added to the Request-URI when the ENUM action is performed.
This column is only available when the Advanced SIP Routing or the SIP Trunking module
has been installed.
ENUM Root
If ENUM should be performed for this request, you must select an ENUM Root. Select from
the roots created in the ENUM Root table.
This column is only available when the Advanced SIP Routing or the SIP Trunking module
has been installed.
Time Class
For each rule you select a Time class, which regulate on what days and at what time of a
day the rule will be active. Inactive rules are ignored when deciding what should be done
with the incoming SIP signaling. You define the different time classes on the Time Classes
page under SIP Traffic.
This column is only available when the Advanced SIP Routing or the SIP Trunking module
has been installed.
201