Administrator's Guide

Chapter 11. SIP Traffic
as $1, and user, which is referred to as $2. You can always refer to the entire Request-URI
with $0.
By adding the parameter ";b2bua" at the end of the expression, you force the request to the
Telecommuting Module back-to-back user agent, which will make it stateful for all requests.
This can be useful if you want the Telecommuting Module to send RADIUS accounting
tickets for all calls.
This column is only available when the Advanced SIP Routing or the SIP Trunking module
has been installed.
Delete Row
If you select this box, the row is deleted when you click on Create new rows or Save.
Create
Enter the number of new groups and rows you want to add to the table, and then click on
Create.
Dial Plan
Here, you create the actual Dial Plan. For each line, select a From entry and Request-URI to
match. Then select an Action and, optionally, a Forward to entry to define how the matching
requests should be handled by the Telecommuting Module.
You may define lines without a Forward to definition. This is useful if you for example are
forwarding by ENUM.
No.
This is a number that is used to identify each individual Dial Plan rule. Rules are sorted
in numerical order. To move a rule to a certain row, enter the number on the row to which
you want to move it. You need only renumber rules that you want to move; other rules are
renumbered automatically. When you click on Save or add a new row, the rules are re-sorted.
The order of the rules is important. Rules are used in the order in which they are displayed
in the table; rule number 1 is first.
From Header
Select a matching From header pattern, created in the Matching From Header table;
Selecting "-" means that no restrictions are made on the From header or sending IP address.
This column is only available when the Advanced SIP Routing or the SIP Trunking module
has been installed.
200