Administrator's Guide

Chapter 11. SIP Traffic
RADIUS Accounting
RADIUS Accounting can be used to keep track of user calls. This enables billing users for
SIP calls.
When RADIUS Accounting is turned on, the Telecommuting Module sends account ticks to
notify the configured RADIUS server about when calls start and stop. RADIUS Accounting
is defined in RFC 2866.
When RADIUS Accounting is used, you must also enter a RADIUS server on the RADIUS
page under Basic Configuration.
Save
Saves the Authentication and Accounting configuration to the preliminary configuration.
Cancel
Reverts all of the above fields to their previous configuration.
Dial Plan
The Dial Plan lets you route incoming SIP calls based on the incoming From header and
Request-URI.
When neither the Advanced SIP Routing nor the SIP Trunking module has been installed,
this page presents only limited functionality.
General
Use Dial Plan
The Dial Plan can be turned On, Off or used in Fallback mode. In fallback mode, the Dial
Plan is inactive unless a particular SIP server to be routed to is out of order. As a backup, the
Dial Plan then becomes active.
Emergency Number
Enter the emergency phone number for your country (like 112 or 911). Calls to this number
will be allowed even if all SIP traversal licenses are used up.
195