Administrator's Guide

Chapter 10. SIP Services
client/server.
The Record-Route header makes all subsequent SIP signaling for this session to be routed
via the Telecommuting Module even if it is not the shortest route.
Here, you select to add Record-Route headers for all requests or not.
Force Remote TLS Connection Reuse
Enter SIP servers to which the Telecommuting Module connects using TLS. For the listed
servers, the Telecommuting Module will use the actual source port for the TLS connection
instead of port 5061.
This is useful in the SIP signaling, where port numbers are used in Via and Route headers.
DNS Name Or IP Address
Enter the DNS name or IP address for a SIP server for which the Telecommuting Module
should reuse TLS ports.
IP address
Shows the IP address of the DNS Name Or IP Address you entered in the previous field.
Delete Row
If you select this box, the row is deleted when you click on Create new rows, Save, or Look
up all IP addresses again.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Accept TCP Marked As TLS
When a TLS accelerator is used, SIP packets can be sent to the Telecommuting Module via
TCP, but the packet content will look as if TLS was used.
170