Administrator's Guide

Chapter 9. Logging
Packet Load
Interface
You can select one or more of the Telecommuting Module’s interfaces or the total traffic.
Selecting more than one interface will generate one graph per interface. You can also select
to view only VPN traffic.
Direction
Select one or more of Sent, Received and Sent+Received. Each selection generates a sepa-
rate graph in the diagram.
Unit
Select between displaying packets/second or bits/second. The graphs may look different,
because all packets aren’t the same size.
Max Value
Enter the maximum value to show in the diagram. If no value is entered, the diagram auto-
matically scales to a suitable value.
Time Period
Select a time period or enter a period of your own choice in the bottom fields. The date
is written as a year with two or four digits, month (01-12) and day (01-31). The optional
punctuation between year, month and day must be dash (-). Time is written as two digits
for the hour, two digits for the minute and possibly two digits for the second, although the
seconds can be left out. The optional punctuation between hours, minutes and seconds must
be colon (:) or period (.).
146