Administrator's Guide

Chapter 9. Logging
S SYN Request for connection
A ACK Response to a previous packet
U URG Contains out-of-band data
P PUSH Packets that must be delivered quickly
F FIN Disconnect request
R RST Reset - response to incorrect packet
For more information on flags, see RFC 793.
When the clock is reset, the log shows this on a separate line like this:
If the Telecommuting Module is restarted, the log shows this on a line like this:
Display Load
On this page, you can see statistics on the traffic load to and from the Telecommuting Mod-
ule’s interfaces and the memory and CPU load.
Once every 10 seconds, the load on all interfaces is scanned and saved to a local file. Ev-
ery file contains 240 samples and a file generation consists of 42 files and has a size of
approximately 20 MB. The first generation of files contains samples for the last week (ap-
proximately). Every new file generation is created by merging two consecutive samples,
enabling the storing of samples for the double time period in the same disk space. Merg-
ing the samples include calculation of the minimum, average and maximum values for the
time interval covered by the samples. After ten generations (about 3 years) the samples are
deleted.
145