Administrator's Guide

Chapter 8. Network Configuration
Routed network
Enter the DNS name or IP address of the routed network under DNS Name Or Network
Address.
The IP address of the routed network is shown under Network address.
In the Netmask/Bits field, enter the netmask of the network.
Router
The name or IP address of the router that will be used for routing to the network. If there
are several routers between the Telecommuting Module and the network, fill in the router
closest to the Telecommuting Module.
If an interface will receive its IP address from a DHCP server, the Telecommuting Module
will get its default gateway from the server. In this case, select the corresponding IP address
under Dynamic.
Delete Row
If you select this box, the row is deleted when you click on Create new rows, Save, or Look
up all IP addresses again.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Save
Saves all Interface configuration to the preliminary configuration.
Cancel
Clears and resets all fields in new rows and resets changes in old rows.
Look up all IP addresses again
Looks up the IP addresses for all DNS names on this page in the DNS servers you entered
on the Basic Configuration page.
This button will only be visible if a DNS server has been configured.
128