Administrator's Guide

Chapter 7. Administration
Active time zone shows the current time zone setting. Change time zone by selecting one in
the left-hand box and press the Change time zone button.
Preferrably, select a city in your country as opposed to selecting a GMT time zone. With the
location selection, the Telecommuting Module will also compensate for things like Daylight
Saving Time.
Change Date and Time Manually
Here you change the Telecommuting Module clock manually. When you change time here,
there will be a time gap in the log files (if you change time forwards) or the same time will
be shown twice (if you change time backwards).
N.B. Before you change time here, make sure that the Telecommuting Module uses the
correct time zone above.
Date
The date is written as four digits for the year, two for the month and two for the day. The
punctuation between year, month and day must be dashes (-).
Time
Time is written as two digits for the hour, two digits for the minute and two digits for the sec-
ond, although seconds can be left out. The punctuation between hours, minutes and seconds
must be colon (:) or period (.). A 24-hour clock is used.
Set date and time manually
Click on Set date and time manually to change the clock in the Telecommuting Module to
what you entered in the Date and Time fields.
114