Administrator's Guide

Chapter 6. Basic Configuration
Internal users have to configure the Telecommuting Module as outbound proxy, or an internal
proxy has to use the Telecommuting Module as outbound proxy.
The Telecommuting Module derives information about your network topology from the in-
terface configuration.
Standalone Configuration
Using this configuration, the Telecommuting Module is connected to the outside on one
interface and your internal networks on the others.
Use this configuration only if your firewall lacks a DMZ interface, or for some other reason
cannot be configured for the DMZ or DMZ/LAN alternatives.
Internal users have to configure the Telecommuting Module as outbound proxy, or an internal
proxy has to use the Telecommuting Module as outbound proxy. No change in the firewall
configuration is needed.
The Telecommuting Module derives information about your network topology from the in-
terface configuration.
Telecommuting Module Type configuration
Current Telecommuting Module Type
Shows which type is currently active.
Change Telecommuting Module Type to
Select a new Telecommuting Module Type here.
101