Administrator's Guide

Chapter 6. Basic Configuration
Save
Saves the SNMP configuration to the preliminary configuration.
Cancel
Reverts all of the above fields to their previous configuration.
Look up all IP addresses again
Looks up the IP addresses for all DNS names on this page in the DNS servers you entered
on the Basic Configuration page.
This button will only be visible if a DNS server has been configured.
Dynamic DNS update
Usually, static DNS servers are used to associate a domain or host name with an IP address.
If the Telecommuting Module gets its public IP address via DHCP or PPPoE, the static DNS
servers will not work, as they do not automatically change bindings when the Telecommuting
Module get a new IP address.
3Com VCX IP Telecommuting Module supports dynamic DNS update at DynDNS.org. You
must purchase the update service at DynDNS.org before you can use it.
DynDNS General Configuration
Here, make settings which the Telecommuting Module will use when updating IP addresses
at DynDNS.org. In the descriptions below, the example domain example.com is used.
Use DynDNS
Select if the Telecommuting Module should use DynDNS services to update IP addresses.
DynDNS service
Select which service you use at DynDNS.
92