User Manual

NOTE: To view information on the screen in portrait mode, you can install the HP Display Assistant
software included on the software and documentation optical disc. The position of the OSD menu can
also be rotated to portrait mode. To rotate the OSD menu, access the OSD menu by pressing the Menu
button on the front bezel, select OSD Control from the menu, and then select OSD Rotation.
Turning on the monitor
1. Press the Power button on the computer to turn it on.
2. Press the Power button on the front of the monitor to turn it on.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on the screen
for 12 or more consecutive hours of nonuse. To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn o the monitor when it is not in use for a prolonged
period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a “burned-in
image” are not covered under the HP warranty.
NOTE: If pressing the Power button has no eect, the Power Button Lockout feature may be enabled. To
disable this feature, press and hold the monitor Power button for 10 seconds.
NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of the monitor,
and then select Power Control > Power LED > O.
Setting up the monitor 9