Application Guide

The steps in this section describe how to run the tests and view the test logs. Use the following
tests to check for hardware failures.
Run the Fast Test
The Fast Test performs a fast check of your system to make sure that the main components are
functioning properly. The following tests are performed.
 Battery check
 Processor check
 System board check
 Hard drive SMART check
 Hard drive short DST check
 Memory fast check
You cannot use your computer during the test. This test takes 3 to 5 minutes or more to
complete, depending on the system configuration. You can cancel at any time by pressing the
Escape key (Esc).
Use the following steps to run the Fast Test.
1. From the main menu, click System Tests, then click Fast Test.
Figure : Selecting the Fast Test