User's Manual

5
EN
Section 2
Getting Started
Loading the Battery
Before using the camcorder, you must load the Lithium-ion
rechargeable battery.
Slide the latch at the bottom to remove cover. 1.
Insert the battery following to the correct polarity marks 2.
( + or -).
Replace the battery cover.3.
Note
When the battery is absent, the date and time will •
be reset.
Charging the Battery
For optimal exibility, this camcorder can be recharged using the USB port of most PCs/laptops or with
the AC adapter provided in the packaging.
Recharging from a PC/Laptop USB port
Be sure the PC or Laptop is powered up before beginning. Connect the camcorder to the PC/Laptop 1.
USB port using the provided USB cable as illustrated below.
This should display the [PC Mode] and [Charge Mode]menu on the camcorder LCD. Use the Tele/2.
Wide buttons (
/ ) to highlight [Charge Mode].
Press the Record/OK button ( 3.
) to select the option. Shortly after, the camcorder will display a
charging battery icon on the LCD. The LCD will turn off after 3 seconds.
Please allow 5 to 9 hours for a full charge. After charging, disconnect the camcorder from the USB 4.
cable for normal use.
Press OK Key