- Hewlett-Packard Server User Manual

60 Chapter 3
Power-On Self Test
Interactive mode
Table 9 Name of CTI cache size IP address for listed utilities
• boot_module—Specifies which client to turn execution control over
to at the completion of POST execution. [default: OBP]
Table 10 Name of boot module for listed utilities
• selftest_enable—Enables selftest control if the processor selftest
is executed during POST start-up execution. [default: true]
Table 11 Name of selftest enable for listed utilities
• scuba_test_enable—Enables Scuba test control if the SCUB
SRAM is tested before initialization. This affects the processor
initialization, since processors test and initialize their own stack
region. It also affects the SCUB initialization and core LAN SRAM
initialization steps for the monarch. [default: true]
Utility Parameter name
OBP cti-cache-size
POST cti_cache_size
sppdsh cti_cache_size
Utility Parameter name
OBP boot-module
POST boot_module
sppdsh boot_module
Utility Parameter name
OBP selftest?
POST selftest_enable
sppdsh selftest_enable