User`s guide

Number Storage and Storage Register Arithmetic52
Example
Use the M register to add 17, 14.25, and 16.95. Then subtract 4.65 and recall the result.
Using Numbered Registers
The \w and v keys access the 20 user registers, designated 0-19. The
\w key is used to copy the displayed number to a designated register. The v key
is used to copy a number from a register to the display.
To store or recall a number in two steps:
•Press \w or v. To cancel this step, press | or M.
•Press
\w followed by a number key, : to d, or 7 and : to d, to store a
number in the display into a numbered data storage register. Press
\w7 followed by
: through d to access registers 10-19.
•Press
v followed by a number key, : to d, or 7 and : to d, to recall a
number from a storage register. Press
v7 followed by : through d to access registers
10-19.
Example
In the following example, two storage registers are used. Set the calculator for CHAIN mode
(]?) and calculate the following:
Table 4-6 Calculating basic arithmetic operations using M register
Keys Display Description
Jjs
17.00 Stores 17 in M re gister.
JY7GVm
14. 25 Ad d s 14. 25 t o M re g i st e r.
JS7dVm
16.95 Adds 16.95 to M register.
Y7SVym
-4.65 Adds -4.65 to M register.
p
43.55 Recalls contents of the M
register.
475.6
39.15
----------------
and
560.1 475.6+
39.15
---------------------------------------