SysMan on iPAQ Accessing SysMan Menu from an iPAQ Pocket PC Part Number: AA-xxxxx-TF November 2002 Operating System and Version: Tru64 UNIX, Version 5.1 and higher This document describes the installation procedure and the instructions for accessing the SysMan Menu from a HP iPAQ Pocket PC.
© 2002 Hewlett-Packard Company COMPAQ, the Compaq logo, Tru64, and TruCluster are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and/or other countries. Microsoft, Windows, Windows 200, Windows NT, Windows XP, Windows CE, Pocket PC Software 2002, and ActiveSync are trademarks of Microsoft Corporation in the U.S. and/or other countries. UNIX and The Open Group are trademarks of the Open Group in the U.S. and/or other countries.
Contents 1 Installing the Software 1.1 1.1.1 1.1.2 1.1.3 1.2 1.2.1 1.2.2 1.3 1.4 1.4.1 1.4.2 Minimal Requirements .. .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... Tru64 UNIX Minimum Requirements ... ... .. ... ... .. ... .. ... Personal Computer Minimum Requirements ... ... .. ... .. ... iPAQ Pocket PC Minimum Requirements .. .. ... ... .. ... .. ... Transferring SysMan iPAQ software . ... .. ... ... .. ... ... .. ... .. ... Downloading by way of the Tru64 UNIX System . .. ... .. ...
1 Installing the Software You can perform system administration tasks remotely on a system running Tru64 UNIX by using your iPAQ Pocket PC hand-held computer, after you download and install the SysMan iPAQ software. 1.1 Minimal Requirements The following section states the minimal requirements for both the installation and use of the software to access the SysMan Menu from the iPAQ Pocket PC hand-held computer.
1.1.2 Personal Computer Minimum Requirements The primary use of the PC is to download files to the iPAQ Pocket PC using Microsoft® ActiveSync software; the following are required to do so: • Microsoft Windows® 2000, 98, Windows NT® Workstation 4.
This software may not be installed on your iPAQ Pocket PC; it is available from the Pocket PC companion CD, which accompanies the iPAQ 3800 series and 3900 series. 1.2 Transferring SysMan iPAQ software The software that enables the iPAQ Pocket PC to access the Tru64 UNIX SysMan Menu is available over the Internet at the following URL: http://www.tru64unix.compaq.com/ipaq There are other useful files, including this document in PDF format, at this site also.
These methods are described in the following sections. 1.2.1 Downloading by way of the Tru64 UNIX System Transfer the sysmanipaq.cab file from the web site to the Tru64 UNIX system, then to the PC, then to the iPAQ Pocket PC as follows: 1. Use a browser to download the sysmanipaq.cab file from the web site (http://www.tru64unix.compaq.com/ipaq) to a temporary directory on the Tru64 UNIX system. If you download an archive file, you need to extract the sysmanipaq.cab file. 2.
1.2.2 Downloading by way of the PC Transfer the sysmanipaq.cab from the web site to the PC, then to the iPAQ Pocket PC: 1. Use a browser to download the sysmanipaq.cab file from the web site (http://www.tru64unix.compaq.com/ipaq) to the My Documents folder of the PC. If you download an archive file, you need to extract the sysmanipaq.cab file. 2. Ensure that the PC and the iPAQ Pocket PC are properly connected using the serial or USB cable. 3. Invoke the Microsoft ActiveSync Software from the PC. 4.
1.4.1 Upgrade Determination There is an instance when you should not upgrade the authentication server. If you have not installed patches to your Tru64 UNIX V5.1A system, you can use the procedure in Section 1.4.2 to upgrade the Authentication Server. If patches have been installed, or you are not sure, use the following procedure to determine whether this applies to your system. 1. Invoke the dupatch utility, which is delivered with each patch kit. The Main Menu is displayed. 2.
If you are running Tru64 UNIX V5.1: a. Use a browser to download the Authentication Server from the following web site: http://www.tru64unix.compaq.com/ipaq. If you have transferred this file as part of an archive, extract the smauth.jar_v51 file from the archive and move it to the Tru64 UNIX system. b. Rename the smauth.jar_v51 file to smauth.jar file # mv smauth.jar_v51 smauth.
2 Accessing the SysMan Menu Accessing the SysMan Menu for a given host requires that you: • Start the SysMan application by tapping Start then SysMan Menu on the iPAQ Pocket PC; this action opens the Host List. • Initially add a host to the list by specifying its IP address or host name. • Select a host by tapping its entry in the Host List. • Log in to that host and enter a password in the Authentication window. The SysMan Menu for the remote host opens. 2.
3. Continue this procedure for any other hosts you want to be listed. You can now access that host by selecting it from the list. 2.1.3 Modifying Hosts Follow this procedure should you need to change the hostname or IP address of a host in the Host List stored on the iPAQ Pocket PC. 1. Tap the specific host in the Host List. 2. Tap the Modify button. The Modify dialog box opens. 3. Correct the name or IP address of the host. Select OK. The Host List is updated. 4.
Tap the Exit button on the SysMan Menu to exit it and return to the Host List.
