HP UEFI System Utilities User Guide for HP ProLiant DL580 Gen8 Servers

Figure 85 Advanced Options — PCI Bus Padding Options
Setting Power-On Logo
This option controls the display of the logo during system boot. This is an aesthetic modification
only and does not affect the system boot times.
To set power-on logo:
1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration
(RBSU)→Advanced Options→Advanced System ROM Options→Power-On Logo and press
Enter.
2. Select one of the following options:
• Enabled (default)
• Disabled
3. Press F10 to save your selection.
94 Accessing the System Configuration Menu