HP UEFI System Utilities User Guide for HP ProLiant DL580 Gen8 Servers

Figure 72 BIOS Serial Console and EMS — BIOS Serial Console Emulation Mode screen
Setting BIOS Serial Console Baud Rate
You can set the transfer rate at which data is transmitted through the serial port.
To set the BIOS Serial Console Emulation Port:
1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration
(RBSU)→BIOS Serial Console and EMS and select BIOS Serial Console Baud Rate and press
Enter.
2. Select one of the following baud rates:
• 9600
• 19200
• 57600
• 115200 (default)
3. Press F10 to save your selection.
Accessing the BIOS/Platform Configuration (RBSU) menu 81