User's Manual

HP Smart Array 641/642 Controller User Guide 7-1
HP CONFIDENTIAL
Writer: John Turner File Name: h-ch7 upgrading or replacing the cache
Codename: darkmatter - antimatter Part Number: 309311-001 Last Saved On: 11/6/02 4:18 PM
7
Upgrading or Replacing the Cache
WARNING: There is a risk of explosion, fire, or personal injury if the battery
pack is not properly handled. Refer to Appendix B and the Battery
Replacement Notice in Appendix A before installing or removing the cache.
To remove the cache module, open the DIMM ejector latches (1) on each side of the
DIMM connector, and then pull the cache out of the DIMM slot (2).
1
2
This drawing represents the Smart Array 642 Controller. The cache on the Smart
Array 641 Controller is removed in an identical manner.
To replace the cache module, reverse this procedure.