RAID Array 410 HSZ40 HSOF Software Version 3.7 for Compaq Tru64 UNIX Release Notes

Release Notes

AA–RMBXA

−

TE Page 59

CAUTION

Be sure to use OTHER as the qualifier in the COPY=

command to properly match the Product ID’s.

13. Follow the commands in the example below to correct the device files:

Scan the SCSI interfaces to update the operating system’s view of device

changes and create new devices as necessary.

NOTE

Depending on the size of your configuration, the scan may take

several minutes to complete. The presence of tape devices will

further increase the delay to complete the scan. For this reason,

you may wish to use the -bus qualifier to specify the bus you

want to scan. The correct bus number can be determined by

examining the “location” field of the “hwmgr -view devices”

output.

# hwmgr -view devices

HWID: Device Name Mfg Model Location

----------------------------------------------------------

39: /dev/disk/dsk4c DEC HSZ40 (C) DEC bus-1-targ-6-lun-0

Issue the command for the appropriate bus (1 in this example).

# hwmgr -scan scsi -bus 1

b. In order to understand which devices need to be redirected to the newly

created devices, examine the current list of devices prior to rebooting the

system:

# hwmgr -view devices