RAID Array 410 HSZ40 HSOF Software Version 3.7 for Compaq Tru64 UNIX Release Notes

Release Notes
AA–RMBXA − TE Page 61
c. At this point, you should reboot the system (ONLY TO SINGLE-USER
MODE).
Then mount the root file system to enable writing to the disk:
# shutdown -h now
.
.
.
P00>>> boot -flag s dkb600
.
.
.
Starting secondary cpu 1
INIT: SINGLE-USER MODE
# mountroot
.
.
.
d. Examine the output of "hwmgr -view devices" and "hwmgr -show scsi"
(The scsi DID output will be necessary to execute the hwmgr –redirect
commands).
# hwmgr -view dev -cat disk
HWID: Device Name Mfg Model Location
----------------------------------------------------------
27: /dev/disk/floppy0c 3.5in floppy fdi0-unit-0
34: /dev/disk/dsk0c DEC RZ28 (C) DEC bus-0-targ-1-lun-0
35: /dev/disk/dsk1c DEC RZ26L (C) DEC bus-0-targ-2-lun-0
36:/dev/disk/cdrom0c DEC RRD44 (C) DEC bus-0-targ-5-lun-0
39: /dev/disk/dsk4c DEC HSZ40 (C) DEC bus-1-targ-6-lun-0
40: /dev/disk/dsk5c DEC HSZ40 (C) DEC bus-1-targ-6-lun-1
44: /dev/disk/dsk6c DEC HSZ40 (C) DEC bus-1-targ-3-lun-0
45: /dev/disk/dsk7c DEC HSZ40 (C) DEC bus-1-targ-3-lun-1