HP Tru64 UNIX Release Notes for Version 5.1B-4 (13157)

• Installing on new, update, or preinstalled operating systems
If this is a new or update (from a pre-Version 5.1B system) installation, or an installation
that was preinstalled (called factory installed systems, or FIS), begin by reviewing the Tru64
UNIX Installation Guide . See Section 1.2 for FIS systems and Section 1.3 to determine the
type of installation that best meets your needs.
To access the Installation Guide, install the Tru64 UNIX Documentation Library. The Installation
Guide is included with the documentation set's System and Network Management
Documentation library.
• Installing on a cluster
If you are installing on a cluster, start with Section 1.4 of the Version 5.1B Installation Guide
for guidance in obtaining the information you need.
• Installing Version 5.1B-4
If you are updating your Version 5.1B system to Version 5.1B-4 and do not need to install
the features provided on the New Hardware Delivery 7 CD, see “Accessing the Version
5.1B-4 CD” (page 16).
• Installing associated products
Appendix D of the Tru64 UNIX Installation Guide will help you install one or more of the
associated products provided on the two Associated Products disks included with the
Version 5.1B-4 kit.
• Installing the NHD kit
If you are installing the NHD-7 kit included with Version 5.1B-4, you do not have to
separately install Version 5.1B-4 — that kit is installed as part of the NHD-7 installation
procedure. See the NHD-7 Release Notes and Installation Instructions document included on
the NHD-7 CD. You can access that document as follows:
— For HTML format, point your browser to the following file (where mount_point is
the CD mount point):
file:/mount_point/DOC/02NHD712/TITLE.HTM
— For PDF format, open the file DOC/nhd.pdf using Adobe Acrobat Reader.
Accessing the Version 5.1B-4 CD
To mount the Version 5.1B-4 CD, follow these steps:
1. Log in as superuser.
2. Insert the CD into the CD drive and enter the following command:
# mount -r /dev/disk/cdromNa /mnt
In this command, N is the unit number of your CD device. If you do not know the unit
number of your CD device, the following command will provide that information:
# ls /dev/disk/cdrom*
3. After the CD is mounted, read the information in the 00-READ-ME-FIRST file as follows:
# cd /mnt/patch_kit
# more 00-READ-ME-FIRST
From this directory you can also access the Patch Kit Installation Instructions using your
browser (PatchInstallGuide.htm), Acrobat Reader (PatchInstallGuide.pdf), or
text reader (PatchInstallGuide.txt). This document will guide you through the steps
to install this kit.
16 Choosing and Installing the Software You Need