HP Tru64 UNIX and TruCluster Server Version 5.1B-6 Patch Summary and Release Notes

• Fixes a problem in handling invalid inputs in the libc inet_network routine.
• Fixes an issue in strncmp.
Patch 28028.00
OSFENVMON540
• Fixes a problem in /sbin/init.d/envmon which prevented the envmon daemon from
starting in Japanese locale.
• Fixes a problem in /sbin/init.d/smauth and /sbin/init.d/smsd which prevented
the smauth and smsd daemons from starting or restarting in Japanese locale.
Patch 28034.00
OSFHWBASE540
• Corrects firmware problem with HSZ70.
• Fixes an error handling problem with list traversal in netstat(1).
Patch 28035.00
OSFHWBIN540
• Fixes an issue with tape devices where a rewind may occur when using a no rewind device
special file. This issue is more likely to occur if the sysconfig variable cam_ccfg_aa_enable
in the cam module is set to 1, the default setting, and the device reports that it supports
asymmetric logical unit access in the inquiry data.
• Fixes a problem with the CAM configuration driver by releasing the memory allocated after
completing the REPORT TARGET PORT GROUP command.
• Adds a new feature to the CAM disk driver to dynamically recognize and use new paths
while the device is in use.
• Fixes potential hang in tape backup applications.
• Resolves a locking issue within the USB subsystem that can lead to a system failure.
• Fixes incorrect CAM status from aha_chim driver during bus reset processing.
• Adds support for 2TB LUNs.
• Fixes an issue with handling ssm and l3gh.
• Prevents simple lock timeout panic in emx driver during mailbox commands.
• Provides envmon subsystem enhancements on DS-25 and ES-45 platforms.
• Fixes a panic in alt driver.
• Corrects panic seen during hardware registration.
• Corrects a rare circumstance where an IO can erroneously be returned as successful when
it has failed.
• Provides event markers to track missing binary.errlog events.
• Corrects a Kernel Memory Fault panic in the emx driver.
• Enables capturing of additional state during a system failure to facilitate the analysis of
virtual memory related issues.
• Fixes a Kernel Memory Fault panic in the KZPEA driver.
• Fixes a timing issue during boot process.
• Fixes an issue that caused kernel to read thermal data from power supplies across partition
boundaries.
• Fixes Kernel Memory Fault on inquiry to a non existing LUN connected through KZPEA.
• Fixes "Freed CCB" panic and lock issues.
• Fixes a panic in bcm driver.
• Provides 2TB LUN support in disk recovery.
• Fixes a KMF during boot when KMEM_DEBUG_PROTECT is enabled.
66 Tru64 UNIX Patches