System information

Display assembly
Description Spare part number
12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, microphones,
fingerprint reader, WLAN antenna cables, and WWAN antenna cables
595299-001
12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, microphones,
fingerprint reader, and WLAN antenna cables
584226-001
12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, microphones,
WLAN antenna cables, and WWAN antenna cables
595298-001
12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, microphones, and
WLAN antenna cables
584225-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 39).
5. Disconnect the WWAN antenna cables from the WWAN module (see
WWAN module
on page 44).
6. Disconnect the WLAN antenna cables from the WLAN module (see
WLAN module on page 50).
7. Remove the hard drive (see
Hard drive on page 41).
8. Remove the top cover (see
Top cover on page 55).
Remove the display assembly:
1. Close the computer and turn it upside down, with the rear panel toward you.
62 Chapter 4 Removal and replacement procedures ENWW