System information

Hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description Spare part number
500-GB, 7200-rpm 584381-001
320-GB, 7200-rpm 584380-001
250-GB, 7200-rpm 584379-001
160-GB, 7200-rpm 584378-001
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws) 584382-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 39).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to
the computer.
ENWW Component replacement procedures 41