Specifications

Display assembly
All display assemblies include WLAN antenna transceivers and cables.
Description Spare part number
Display assembly 25.6-cm (10.1-inch) HD, LED, antiglare SVA flat1366x768, 220 nits, 3.6 mm
742315
For use in pearl white models 742315-001
For use in ano silver models 745026-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 27).
5. Remove the following components:
a. Top cover (see
Top cover on page 29)
b. Power button board
Remove the display assembly:
1. Place the computer upright and open as far as possible.
2. Lift the video cable connector from the system board (1).
Component replacement procedures 37