Specifications

3. To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) then
pull the SODIMM out of the socket (2).
Figure 7-22 Removing a memory module
4. To install a SODIMM, slide the new SODIMM into the socket at approximately a 30° angle (1)
then press the SODIMM down (2) so that the latches lock it in place.
Figure 7-23 Installing a memory module
NOTE: A memory module can be installed in only one way. Match the notch on the module
with the tab on the memory socket.
5. Reconnect and reconfigure the computer. The computer automatically recognizes the additional
memory when you turn on the computer.
Installing memory 53