User's Manual

Getting Started
12 Network Configuration
Network Configuration
If your network uses a remote configuration service such as DHCP
(Dynamic Host Configuration Protocol), the thin client will automat-
ically configure itself for the network when you switch it on.
If your network does not use DHCP, or you need to enter network
settings manually, refer to the section “Network Configuration” on
page 37 for details.
Creating a New Connection
This section describes the basic procedure for creating a new
connection. The example illustrations show the creation of an ICA
connection, but the display for other connection types is very
similar. Descriptions of all the setup options available for each
connection type are provided in the following chapters.
1 Click on the menu button in the taskbar at the bottom of the
display and select
Control Panel in the menu.
The
Control Panel - Main window will be displayed.