User's Manual

TeemTalk Connection Configuration

114 Creating a New TeemTalk Connection

4 In the Name field at the top of the dialog, enter a descriptive

name for the TeemTalk connection. This will be used to identify

the connection to the user.

5 On the Network tab, enter the name or IP address of the server

to connect to in the

Address field.

6 Select the number of the port to use from the Port list.

7 Select the terminal emulation to use from the Emulation list.

8 Click on the tabs along the top of the dialog to access additional

setup options that you may wish to configure. Note that the

options available depend on the terminal emulation chosen in

the

Emulation field. Refer to the sections for each dialog tab

later in this chapter for details of the options available.

9 When you have finished configuring the TeemTalk connection,

click

OK.

An icon for the new TeemTalk connection configuration will be

displayed in the

Control Panel - Connections window and on the

desktop, and it will be listed for selection in the taskbar

and the

Connection Manager.

If you need to change the configuration of a TeemTalk connection,

display the

Control Panel - Connections window then double-click

on the relevant TeemTalk connection configuration icon.