User's Manual

Installing HP Device Manager
14 System Requirements
Network
Requirements
The network should not contain any other running PXE servers. It
should permit free communication on ports used by HP Device Man-
ager. A number of UDP and TCP ports are required for client/server
communication. See Table 1 for a list of standard ports required, and
Table 2 for a list of custom ports required.
If you are using a Server behind a firewall, please add ports 1099 and
40002 to the exception ports in the firewall settings.
Table 1: Standard Ports Required
Port Protocol Purpose
67 & 68 UDP PXE - Bootstrap.
69 UDP TFTP (Trivial File Transfer Protocol).
4011 UDP DHCP Proxy Service (this is an alternative to ports
67 and 68 if those ports are not available).
20 & 21 TCP FTP (used for the Repository).
5900 TCP VNC Server.
Table 2: Custom HP Device Manager Ports Required
Receiver
Port
Sender Receiver Protocol Purpose
1099 Console Server TCP Console queries the RMI
Registry.
40000 Server/
Agent
Gateway UDP Server/Agent polls Gateway.
40001 Gateway Agent TCP Gateway sends task to Agent.
40002 Console Server TCP Console calls the remote
objects on Server by RMI.
40003 Server/
Agent
Gateway TCP Server sends task to
Gateway;
Agent sends report to
Gateway.