User's Manual

Advanced Tasks
174 Adding Devices Using MAC Addresses
2 Enter the MAC Address of the device to be added.
3 Select the Management Gateway that will connect with the
device from the
Neoware Management Gateway ID drop-down
list.
4 Click OK to add the device.
A new device will appear in the device tree with the name
deviceX, where X is a number. This device will appear as pow-
ered-off, but you can still interact with the device. For example,
you can use
Send Task to send a new Imaging template to the
device, or
Wake on LAN to attempt to start up the device.