Manualshelf

User's Manual

ManualsBrandsHP ManualsSoftwareHP TeemTalk Terminal Emulator 7 E-License
131132133134135136137138139140
Common Tasks
122 Changing Device Settings
Changing Device Settings
The setup configuration of a device can be changed using templates
listed on the
Settings tab in the Template Pane.
The following sections provide an overview of each template.
Configuring
Network Settings
1 Select the Settings tab in the Template Pane.
2 Double-click the _Network Settings template to display the
Template Editor.
3 Enter the network settings as required.
Note: If
DHCP
is enabled (default), the device will not use static
IP information. If you want to use static IP, select
Disable
.