User's Manual

Common Tasks
Changing Connection Settings 119
Changing Connection Settings
HP thin client devices are designed to access servers or applications
through pre-defined ICA, RDP, terminal emulation or Web browser
connections. HP Device Manager enables you to copy these pre-
defined connection settings from one thin client to others of the
same model and operating system type.
Important: Before copying the connection settings of a device, you
must make sure that each connection is properly configured and
tested on the network where the connections will be used.
1 Configure a thin client device with the required connection
settings and ensure that the connections work on the network
where they will be used.
2 Run the Management Console and display the name of the
device with the correct connections in the device tree.
3 Select the Connections tab in the Template Pane, then double-
click on the
_Get Connection Configuration template to display
the
Template Editor.
4 Use the check boxes to indicate which connection settings to
retrieve from the device.
5 Enter a name for the template which will be created to store the
connection settings.