User's Manual

Using the HP Management Console
Power Management 93
Power Management
The Management Console enables you to reboot, shutdown and
wake a client remotely. This can be achieved either by using the tem-
plates available on the
Operations tab, or by selecting from the pop-
up menu when you right-click on a device as described below.
Note: To wake a client, the Wake On LAN support of the client’s
BIOS must be enabled.
To shutdown, reboot, or wake a client:
1 Select a device from the Device Pane in the main Console
window.
2 Right-click and select Power Management > Reboot, Wake On
LAN or Shutdown from the pop-up menu.
3 The Task Editor dialog will be displayed. Click OK to perform
the task.
When the client receives the task, a warning dialog will appear on
the screen of the client device to inform the user that the device will
be shutdown or restarted.