User's Manual

COMPANY CONFIDENTIAL
42
2.1.5 SDIO Secure digital input/output
 Two controller ports
 Up to 48 MHz
 4-bit interface
 Interface through Linux MMC stack
2.1.6 WLAN driver Support for wireless networking over
SDIO
2.1.7 SPI Driver Peripheral driver for Serial Peripheral
Interface bus can use Data Mover and
clock up to 26 MHz
2.1.8 SSBI Driver Driver for SSBI (Single-Wire Serial Bus
Interface) bus hardware cores
2.1.9 2KB. 4KB, and 8KB size pages
SLC NAND x8 and x16
Flash driver support for 8-bit and 16-bit
Single Level Cell (SLC) NAND devices
with 2k page size
2.2 Modem Interface
2.2.1 AT Command Support (GCF) Support for AT commands required for
GCF testing. See document
80-VR432-1 for details.
2.2.2 Dial-up Networking over USB Support for tethered dial-up networking
over USB
2.2.3 QMI QMI is to be used by 3rd party operating
systems to configure the modem data
stack
2.2.4 Multimode: QMI – Add One
Field toDetermine if Record is
Read Only or Read-Write in
QMI_PBM_RECORD_READ_I
ND
Adding a field to know whether the
record is read only or read-write in
QMI_PBM_RECORD_READ_IND. This
is required instead of determining
through UIM for this information. This
feature tells the clients if a particular
phonebook is writeable or not and if not
what validation is required
2.2.5 Multimode: QMI – WMS SEND
RAW Async Command
Add support so raw-send and send-ack
can be asynchronous
2.2.6 Data Interface: IMS – VT:
Support Rm Socket Interface
between AP and Modem
Provides a Rm Socket Interface
between AP and Modem for VT Support
2.2.7 Modem Interfaces: QMI –
Provide Number of USIM
Entries per Contact
PBM support for providing the number
of USIM contacts that can be associated
with a contact stored on the SIM card.
USIM contacts include E-mail, Additional
Number, Group name and SNE
2.2.8 Multimode: Emergency
Services – RAT Based ECC
Number Handling
CM acquires a RAT based on ECC list
for emergency call and PBM maintains
ECC list per RAT and provide new API
for call type resolution
2.2.9 IMS Voice Loopback Mode
Support
Support loopback mode for voice
packets in IMS