Troubleshooting guide

4 BIOS Settings, (F10) Utility
Using the BIOS Settings
VIA Eden processors and the VIA VX800 chipset are used in the t5145, t5540, t5545 and t5630/t5630w
products.
Changing BIOS Settings from the repset utility
Some BIOS settings may be changed locally within the operating system without having to go through
the F10 utility
1
. This table identifies the items that can be controlled with this method.
BIOS Setting Default Value Other Values
1st Boot Device USB ATA Flash, Network, Disabled
2nd Boot Device ATA Flash USB, Network, Disabled
3rd Boot Device Network ATA Flash, USB, Disabled
Boot Up NumLock Off On
F12 Boot Enabled Disabled
Integrated Audio Enabled Disabled
Network Controller Enabled Disabled
Serial Port 1 3F8/IRQ4, other values = 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3
Disabled
Parallel Port 378/IRQ7, other values = 278/IRQ5, 3BC/IRQ7 Disabled
PWRON After PWR-Fail Former State On, Off
Wake-on-PME Enabled Disabled
BIOS Wake Up Disabled Enabled, days of the week & time
Asset Tag No 000000000000000000 User input (18 chars)
Setup Password blank User input (8 chars max)
Power-On Password blank User input (8 chars max)
Parallel Mode ECP/EPP Standard, EPP, ECP
ECP Mode Use DMA DMA3 DMA1
USB Controller Enabled Disabled
External USB Ports Enabled Disabled
20 Chapter 4 BIOS Settings, (F10) Utility