Hardware reference guide

C Mounting the Thin Client

HP Quick Release

This thin client incorporates four mounting points on each side of the unit. These mounting points

follow the VESA (Video Electronics Standards Association) standard, which provides industry-

standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays, and

flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing you to

mount the thin client in a variety of orientations.

NOTE: When mounting to a thin client, use the 15 mm screws supplied with the HP Quick Release.

Figure C-1 HP Quick Release

To use the HP Quick Release:

1. Using four 15 mm screws included in the mounting device kit, attach one side of the HP Quick

Release to the thin client as shown in the following illustration.

Figure C-2 Connecting the HP Quick Release to the thin client

ENWW

HP Quick Release