Specifications

Front Fan Assembly
The front fan assembly is attached to the front of the chassis.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 38).
2. Remove the access panel (
Access Panel on page 39).
3. Remove the front bezel (
Front Bezel on page 40).
4. Remove the baffle (
Fan duct on page 59).
5. Disconnect the fan cable from the red/brown system board connector labeled CHFAN1.
Figure 5-27 Disconnecting the front fan cable
6. Press the tabs that secure the fan assembly to the front of the chassis (1).
60 Chapter 5 Removal and Replacement Procedures