Hardware Reference Manual

D HP t200 Zero Client for MultiSeat
Operation
Routine t200 Zero Client Care
Use the following information to properly care for the t200 Zero Client:
●
Never operate the t200 Zero Client with the outside panel removed.
●
Keep the t200 Zero Client away from excessive moisture, direct sunlight, and extreme heat and
cold. For information about the recommended temperature and humidity ranges for the t200 Zero
Client, see
Specifications on page 4.
●
Keep liquids away from the t200 Zero Client.
●
Turn off the t200 Zero Client and wipe the exterior with a soft, damp cloth as needed. Using
cleaning products may discolor or damage the finish.
Supported Orientations
HP supports the following orientations for the t200 Zero Client.
CAUTION: You must adhere to HP-supported orientations to ensure your t200 Zero Client functions
properly.
●
If the t200 Zero Client is not to be mounted, only the horizontal orientation is supported. Be sure
to set the t200 Zero Client on its rubber feet.
Figure D-1 Horizontal orientation
●
You can lay the t200 Zero Client under a monitor stand with at least one inch of clearance.
ENWW
Routine t200 Zero Client Care
11