Hardware Reference Manual

Securing the HP t200 Zero Client for MultiSeat in the Mounting
Bracket
Figure B-2 Securing the t200 Zero Client in the mounting bracket
1. With the tab of the t200 Zero Client security clip pointing down, insert the t200 Zero Client
security clip between the guides on the back of the t200 Zero Client into the slot on the back of
the mounting bracket (1). Use the provided screw to fasten the security clip to the t200 Zero Client
(2).
2. Insert a padlock through the loops of the security clip (3) and lock it to prevent access to the
security clip screw.
6 Appendix B Security Provisions ENWW