Hardware Reference Manual

B Security Provisions

HP t200 Zero Client for MultiSeat Security Clip

The t200 Zero Client ships with a security clip which can be fastened to the rear panel of the t200 Zero

Client. To prevent unauthorized removal of the t200 Zero Client, fasten a padlock through the clip and

a cable.

Securing the HP t200 Zero Client for MultiSeat

Figure B-1 Securing the t200 Zero Client

1. With the tab of the t200 Zero Client security clip pointing up, insert the t200 Zero Client security

clip between the guides on the back of the t200 Zero Client (1). Use the provided screw to fasten

the security clip to the t200 Zero Client (2).

2. Insert a padlock through the loops of the security clip (3) and a cable.

ENWW

HP t200 Zero Client for MultiSeat Security Clip