Specifications

9 Creating New Connections
The New Connection dialog box is used to create new connections. Figure 9-1
shows the New Connection dialog box.
Figure 9-1 New Connection Dialog Box
Using the New Connection Dialog Box
To invoke the dialog box:
1. Click on the Configure tabintheConnection Manager dialog box.
2. Click on the Add command button on the Configure properties sheet.
See “Connection Configuration” for details about the Connection Manager.
Use the scroll list shown in the dialog box above to select the type of connection
protocol you want. When you choose from the list above, you are deciding which
connection protocol you want to use to connect to a server. Six selections are
available.