Specifications

14 Terminal Installation
TurningOntheTerminal
Once the terminal is installed and all back panel connections have been made,
power it up. It is powered-up and operating when the power supply is connected to
AC power; to toggle the display off or on, press and release the power button.
Note
If the button is continuously depressed for 3-5 seconds,
the unit will perform a hard boot.
See the following figure for the location of the power button.
Figure 2-3 T1010 Power Button
The splash screen will appear, followed by:
•TheSetup Wizard, if it is the first time that you have turned on your terminal.
•TheConnection Manager dialog box, if the Setup Wizard has been
completed.
Adjustments to the display can be made at any time, whether or not the terminal is
connected to a server. See “Changing Terminal Properties” for more information.