Specifications

47 Terminal Connector Pin
Assignments
The following figure shows the pin assignments for the 10Base-T and 100Base-T
connector. This connector is located on the back panel of your terminal. See
“Terminal Features” for information about the back panel.
Note
It is recommended that you use Category 5 twisted-pair
cable to connect your terminal to a hub.
Figure 47-1 10Base-T and 100Base-T Connector
Pin
Signal Name
1
2
3
6
+Transmit Detect
-Transmit Detect
+Receive Detect
- Receive Detect
Hub
Terminal
10Base-T
Connector
1
8
RJ-45