Specifications

Firmware Upgrades 215
Table 36-1 SNMP Network Administration Dialog Box
Function Description
SNMP
Communication
Use this group box to set up SNMP communication
using the following functions:
Enable Authenticating Failure Trap
Check this box to enable the authenticating failure trap.
Community
Use this group box to configure the network
management of a community.
Get
This field takes the name of the community the SNMP
management software will manage with read
permission only. If this field is left blank, the community
for that terminal will be public. The default for this field
is Public.
Set
This field contains the name of the community the
SNMP management software will manage with write
permission. The default for this field is WBTADMIN.
Note
All Get and Set names are case sensitive.
Trap Destination
Server 1:, Server 2:, Server 3:,andServer 4: are
fields that supply the names or IP addresses of the
servers to which the terminal sends SNMP traps.
(Optional)