Specifications

30 PC Card Adapters for Token
Ring Networks
Note
This chapter applies only to the Model T1010 terminal.
Your WBT supports PCMCIA RACORE token ring adapter cards. This chapter
discusses the setup for RACORE token ring card. Figure 30-1 shows the RACORE
Token Ring Adapter Settings dialog box. Use this dialog box to configure a
RACORE token ring card.
Using the RACORE - Token Ring Adapter Settings Dialog Box
To invoke this dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Devices tab.
3. Click on the RACORE - TR icon in the icon container on the Devices properties
sheet.