Specifications

168 External Devices
Hardware Properties Sheet
The Hardware properties sheet is displayed by default and is shown in
Figure 26-2. The following table discusses the properties sheet.
Table 26-2 Hardware Properties Sheet
Function Description
Information This group box displays information
about the touchscreen that is
connected to your terminal. To display
the information, click on Find
Touchscreen (see below).
Controller Type
This field shows the controller type.
Firmware Version
Thisfieldshowsthefirmwareversion.
Status
Thisfieldshowsthestatus:
• OK
• Not Found
If there is no MicroTouch touch screen
connected to the terminal, the Status
field will display Not Found.
Connection Use this group box to configure the
connection between the terminal and
the touchscreen.
Port
Select the Com port that the
touchscreen is connected to.
Baud Rate
Select the proper baud rate for the
connection.
Find Touchscreen
Click on this command button to detect
the touchscreen.