Specifications

162 External Devices
Note
The Hayes command set is discussed in greater detail
in “Modem AT Commands.”
Table 25-1 Add or Change Modem Dialog Box
Function Description
Modem Name This field displays the brand name of the modem in
your system.
Init Commands Enter a modem initialization command string in this
field. The default is ATE0V1&C1&D1<cr>.
Flow Settings Use this group box to set the following flow settings:
Flow Hardware
Enter a flow hardware command string in this field. The
default is AT&K3<cr>.
Flow Software
Enter a flow software command string in this field. The
default is AT&K4<cr>.
Flow Off
Enter a flow hardware command string in this field. The
default is AT&K0<cr>.